{"product_id":"mapei-prp-312-plani-patch","title":"Mapei PRP 312 Plani Patch","description":"\u003cp\u003e\u003cstrong\u003eMapei Planipatch Plus Acrylic Latex Additive\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanipatch Plus is an acrylic latex additive formulated specifically for use with Planipatch, Mapei's fast-setting, polymer-modified, cement-based patching compound. Mixing Planipatch Plus (undiluted or diluted) with Planipatch powder — sold separately — creates the Planipatch Plus System, which can be used as an embossing leveler or void-filling patch over substrates a standard patch mix can't bond to.\u003c\/p\u003e\n\u003cp\u003eEnhances bond to select nonporous substrates, including vinyl composition tile (VCT), felt-backed sheet vinyl, cutback and carpet-adhesive residue, cement terrazzo, and Mapei moisture barriers — before direct glue-down installation of new floor coverings. Improves flexibility and adhesion beyond what Planipatch achieves with water alone.\u003c\/p\u003e\n\u003cp\u003eRequired whenever Planipatch is used to patch or skimcoat over existing flooring (ceramic tile, sheet vinyl, VCT) or flooring adhesive residue. Once mixed, pot life is approximately 8–10 minutes at 73°F — mix only small batches at a time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1996\/7489\/files\/planipatch-plus.pdf?v=1786985166\" target=\"_blank\" rel=\"noopener\"\u003eClick here for Technical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAcrylic latex additive for Planipatch cement-based patching compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse with\u003c\/td\u003e\n\u003ctd\u003ePlanipatch powder — required, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eEmbossing leveler or void-filling patch over nonporous substrates and adhesive residue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio (full strength)\u003c\/td\u003e\n\u003ctd\u003e1 part Planipatch Plus to 2-1\/2 parts Planipatch powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio (diluted)\u003c\/td\u003e\n\u003ctd\u003e3 parts water to 1 part Planipatch Plus, then combine with powder at the same 1:2-1\/2 ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 gallon jug yields\u003c\/td\u003e\n\u003ctd\u003eMixes with two 10 lb. bags of Planipatch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 gallon pail yields\u003c\/td\u003e\n\u003ctd\u003eMixes with nine 10 lb. bags of Planipatch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e8–10 minutes at 73°F (shorter in warmer conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoisture threshold\u003c\/td\u003e\n\u003ctd\u003eRecommended when MVER exceeds 5 lbs. per 1,000 Sq. Ft. per 24 hrs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage sizes\u003c\/td\u003e\n\u003ctd\u003e1 gallon, 5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCan I use Planipatch with just water instead?\u003c\/em\u003e\u003c\/strong\u003e For patching or skimcoating over existing flooring or adhesive residue, no — Planipatch Plus is required for proper bond. Water alone works on clean, porous concrete or exterior-grade plywood only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much powder does one jug mix with? \u003c\/strong\u003eThe 1 gallon jug mixes with two 10 lb. bags of Planipatch. The 5 gallon pail mixes with nine 10 lb. bags.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can I work with it once mixed? \u003c\/strong\u003ePot life is about 8–10 minutes at 73°F. Warmer temperatures or warm water shorten that window, so mix only small batches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to dilute it?\u003c\/strong\u003e Not necessarily — it can be used full strength or diluted 3:1 with water, depending on the application. Check the Planipatch technical data sheet for guidance on which to use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan id=\"product-sku-search\" class=\"product-sku-search\"\u003eSku: \u003cspan\u003e7050001\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- END FLOORCOMMANDER SKU INSERT --\u003e","brand":"Mapei","offers":[{"title":"1 gallon","offer_id":48627953598658,"sku":"7050001","price":37.59,"currency_code":"USD","in_stock":true},{"title":"5 gallon","offer_id":48627953631426,"sku":"7050005","price":178.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1996\/7489\/files\/swatch_planipatch-plus-1gal.jpg?v=1786985957","url":"https:\/\/flooringmarket.com\/products\/mapei-prp-312-plani-patch","provider":"Flooring Market","version":"1.0","type":"link"}