- Home
- Mannington
- Mannington Luxury Vinyl
- Mannington Luxury Vi...
- Mannington Luxury Vinyl Adura Trim OneNose
Mannington Luxury Vinyl Adura Trim OneNose
No reviews
Disclaimer: Images may be stock photos and may not represent the exact product. Variations in color, pattern, and appearance may occur.
Room Scenes
Mannington ADURA® OneNose™ Step Nosing
The Mannington ADURA® OneNose™ Step Nosing is a professional-grade finish molding designed for use with ADURA® flooring on staircases, open railing, and sunken rooms. At 3.25"W x 1.6"H x 94"L, it delivers a clean, polished transition that complements any ADURA® installation. Adaptable for both flush and overlap installations, OneNose™ works across ADURA® flooring thicknesses from 2.5mm to 8mm, making it one of the most versatile stair nosing solutions available. Made in the USA.
Installation Instructions
- Carefully measure and cut as needed. Utilize enclosed shims as necessary.
- Apply Mannington TripleStick™ adhesive inside the curve and flat spot of the step nosing.
- Roll the step nose into place. Press down firmly over the entire molding, making certain the transition is tight against the existing nosing and substrate. Allow adhesive to cure per directions.
Shim Guide by Flooring Thickness
- 2.5mm: Shims not necessary — overlap installation only.
- 4–6mm: No shims for flush; one shim for overlap installation.
- 8mm: Two shims for flush; three shims for overlap installation.
- Use MSS-20 with applicator bottle or M-Weld to quickly bond shims.
- Glue OneNose™ to substrate with Triple Stick™ adhesive.
- Allow a minimum of 24 hours cure time before foot traffic.
| Product: | ADURA® OneNose™ Step Nosing |
| Width: | 3.25 inches |
| Height: | 1.6 inches |
| Length: | 94 inches |
| Installation Type: | Flush or Overlap |
| Compatible Thickness: | 2.5mm – 8mm |
| Adhesive: | Mannington TripleStick™ |
| Pieces per Carton: | 5 |
| Origin: | Made in the USA |
Sku: 592990
Vendor :
Mannington
Related Products
You might also like
Loading recommendations...
