- Home
- Natural Stone & Marble
- Realstone Systems Casa Di Sassi EZ Ledge Carbone Corners
Realstone Systems Casa Di Sassi EZ Ledge Carbone Corners
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Casa di Sassi EZ Ledge Carbone Dry Stack Stone Veneer Corners
EZ Ledge Carbone corners finish the outside edges of a Carbone flats install. Each piece is an L-shaped stone with a finished face on both sides, so the corner looks like a full-depth stone wrapping around the wall, not a cut edge. They match the flats' dark, cool tone, natural cleft face, and dry-stack look.
Use them on any outside corner: the ends of fireplace surrounds, columns, wainscot ends, window and door returns, and exterior building corners. Corners go in first, alternating long and short returns course to course, and the flats fill in between.
Corners are made by Casa di Sassi from the same Portland cement, lightweight aggregate, and mineral oxide mix as the flats, cast from real stone. They come in the same 2", 4", and 6" heights, so the courses line up with the flats. Install per NCMA guidelines for adhered manufactured stone veneer and local building code. EZ Ledge carries a 50-year warranty.
| Spec | Detail |
|---|---|
| Brand | Casa di Sassi (distributed by Realstone Systems) |
| Collection | EZ Ledge |
| Color | Carbone |
| Piece Type | Corners |
| Material | Manufactured stone (cement-based) |
| Profile | Ledgestone, cleft face, dry-stack |
| Piece Heights | 2", 4", 6" |
| Grout Joint | None (dry-stack) |
| Coverage | 8 Sq. Ft. per carton |
| Application | Interior and exterior walls, fireplaces |
| Warranty | 50 years |
Do corners reduce how many flats I need?
Yes. The corner returns cover some wall area, so subtract that from your flats square footage. Your installer or the manufacturer's estimating guide can give you the exact deduction.
Do I need corners for inside corners?
No. Inside corners are done with flats, butted together. Corners are only for outside corners and exposed ends.
Which goes on first, corners or flats?
Corners. Set them first, alternating the long and short returns each course, then fill in with flats.
Sku: RS-CAEZLC-CDS-8
Related Products
You might also like
Loading recommendations...