- Home
- Natural Stone & Marble
- Realstone Systems Casa Di Sassi EZ Ledge Gola Corners
Realstone Systems Casa Di Sassi EZ Ledge Gola Corners
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Casa di Sassi EZ Ledge Gola Dry Stack Stone Veneer Corners
EZ Ledge Gola corners finish the outside edges of a Gola flats install. Each piece is an L-shaped stone with a finished face on both sides, so the corner looks like a full-depth stone wrapping around the wall, not a cut edge. They match the flats' earthy mix of taupe, stone, and earth tones with hints of gray and brown, plus the same natural cleft face and dry-stack look.
Use them on any outside corner: the ends of fireplace surrounds, columns, wainscot ends, window and door returns, and exterior building corners. Corners go in first, alternating long and short returns course to course, and the flats fill in between.
Corners are made by Casa di Sassi from the same Portland cement, lightweight aggregate, and mineral oxide mix as the flats, cast from real stone. They come in the same 2", 4", and 6" heights, so the courses line up with the flats. Install per NCMA guidelines for adhered manufactured stone veneer and local building code. EZ Ledge carries a 50-year warranty.
| Spec | Detail |
|---|---|
| Brand | Casa di Sassi (distributed by Realstone Systems) |
| Collection | EZ Ledge |
| Color | Gola |
| Piece Type | Corners |
| Material | Manufactured stone (cement-based) |
| Profile | Ledgestone, cleft face, dry-stack |
| Piece Heights | 2", 4", 6" |
| Grout Joint | None (dry-stack) |
| Coverage | 8 Sq. Ft. per carton |
| Application | Interior and exterior walls, fireplaces |
| Warranty | 50 years |
Where do corners make the biggest difference?
Anywhere the side of the wall is visible: fireplace ends, exterior building corners, and columns. Without corners, those edges show the cut side of the flats, and the stone looks thin.
Do I need corners for inside corners?
No. Inside corners are done with flats, butted together. Corners are only for outside corners and exposed ends.
Do corners reduce how many flats I need?
Yes. The corner returns cover some wall area, so subtract that from your flats total. Your installer or the manufacturer's estimating guide can give you the exact deduction.
Sku: RS-GEZLC-CDS-8
Related Products
You might also like
Loading recommendations...