Free Shipping On Orders Over $1500. Limited Time Only.

Realstone Systems Casa Di Sassi Kwik Stack Carbone Corners

Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.

Coverage Calculator

18.0 Sq. Ft. Minimum

 Sq. Ft.

 Carton

$11.39

/Sq. Ft.


$68.34

/Carton

Free Shipping On Orders over $1,500 Over 2,000 Sq. Ft., you may qualify for a volume discount.
Please contact us.

Total Price: 



Casa di Sassi Kwik Stack Stone Veneer Corners – Carbone

Kwik Stack Carbone Corners are the matching outside-corner pieces for Kwik Stack Carbone flats. Each corner is an L-shaped piece with a finished stone face on both sides. It wraps an outside corner so the wall reads as solid stone, not a surface layer. They come in the same deep charcoal Carbone color and split-face, dry-stack texture as the flats, so the corner blends into the field.

Use corners on any outside corner: the edge of a fireplace surround, a column, a chimney chase or the end of an exterior wall. On a flat wall that ends at trim, drywall or an inside corner, you don't need them; the flats can be cut to fit. With a dark stone like Carbone, a cut edge on an outside corner stands out even more, so finished corner pieces make a real difference.

The corners are 4" tall to match the flat courses, with alternating short and long returns (approx. 4" and 8"). Stacking them with the returns alternated ties the corner into the wall in a staggered, interlocking pattern. Like the flats, they install with a zero grout joint.


Spec Detail
Brand / Collection Casa di Sassi Kwik Stack 
Color Carbone (deep charcoal)
Piece Type Outside corner (L-shaped)
Material Cement (manufactured stone veneer)
Finish Natural
Height 4" (matches flats)
Returns Approx. 4" and 8" (alternating)
Grout Joint 0" (dry-stack)
Coverage 6 Sq. Ft. per carton
Applications Outside corners on interior and exterior walls, fireplaces, columns, chimneys

 

Will the corners match the Carbone flats?
Yes. They're made in the same Carbone color and texture. Like the flats, the tones vary from piece to piece between charcoal and near-black, so pull from several cartons as you go.

Can I just cut flats to wrap a corner instead?
You can, but it leaves a raw cut edge where both faces of the wall are visible. Corner pieces have finished stone on both faces, so the corner looks like a full stone.

Are corners needed on a fireplace with a mantel?
Only where the stone wraps an outside edge, such as the sides of a bump-out fireplace. If the stone stops flush at the wall or against the mantel, flats alone will do.

Do Carbone corners work outdoors?
Yes. Like the flats, they're rated for exterior walls, columns and chimneys.

 

 

Sku: RS-CKSC-CDS-6