Free Shipping On Orders Over $1500. Limited Time Only.

Realstone Systems Casa Di Sassi Ledgestone Cremona Corners

Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.

Coverage Calculator

18.0 Sq. Ft. Minimum

 Sq. Ft.

 Carton

$11.39

/Sq. Ft.


$91.12

/Carton

Free Shipping On Orders over $1,500 Over 2,000 Sq. Ft., you may qualify for a volume discount.
Please contact us.

Total Price: 



Casa di Sassi Ledgestone Cremona Corners

Cremona Corners are the matching corner pieces for Casa di Sassi's Ledgestone Cremona stone veneer. Each piece is L-shaped with two finished faces, so outside corners on walls, columns, and fireplace surrounds look like solid stacked stone instead of showing a cut edge. Cremona is a soft mix of gray and taupe with greige undertones. It's neutral enough for both traditional and contemporary homes.

Ledgestone is a manufactured stone veneer made from Portland cement, lightweight aggregates, and mineral oxide pigments, cast in molds taken from real stone. The profile is a rough, split-face ledge: long, narrow stones stacked in tight horizontal courses. Pieces vary in height and depth, which gives the wall natural shadow lines. Stones range from about 1" to 6" tall and 6" to 22" long, and are roughly 1"–2" thick. That makes it much lighter than full-bed stone, so it can go over framed walls without footings or ledgers.

Use Cremona Corners on interior and exterior walls, fireplace surrounds, backsplashes, and accent walls. They are not for floors, hearth tops that get walked on, or showers. Corners come in boxes priced by the linear foot of corner rise and pair with Ledgestone Cremona Flats for a matched install.

 

Spec Detail
Brand / Collection Casa di Sassi / Ledgestone
Color Cremona (gray and taupe with greige undertones)
Product Type Corner (accessory)
Material Manufactured stone (Portland cement, lightweight aggregate, mineral oxides)
Texture Split face
Stone Size Range ~1"–6" H × 6"–22" L (irregular)
Thickness ~1"–2"
Coverage 8 Sq. Ft.
Applications Interior and exterior walls, fireplace surrounds, backsplash, accent walls
Not For Floors, showers, areas exposed to de-icing salts or harsh chemicals

 

Why set the corners before the flats?
Corners set the course lines. Flats are easier to cut and fit, so they fill in between the corners.

Does Cremona work with both warm and cool finishes?
Yes. The gray and taupe blend sits in the middle, so it pairs with white trim, wood, black metal, or warm brick without clashing.

Can Cremona go on an exterior wall?
Yes. Keep de-icing salt and harsh cleaners off it, and don't pressure wash or sandblast it.

Does the corner color match the flats exactly?
Corners and flats are cast in the same color, but manufactured stone has natural shade variation from piece to piece. Blend stones from several boxes as you install.

 


Sku: RS-CMLC-CDS-8