- Home
- Natural Stone & Marble
- Realstone Systems Casa Di Sassi Ledgestone Gola Corners
Realstone Systems Casa Di Sassi Ledgestone Gola Corners
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Casa di Sassi Ledgestone Gola Corners
Gola Corners are the matching corner pieces for Casa di Sassi's Ledgestone Gola stone veneer. Each piece is L-shaped with two finished faces, so outside corners on walls, columns, and fireplace surrounds look like solid stacked stone instead of showing a cut edge. Gola is a warm blend of browns and tans with soft beige mixed in. It's the earthiest color in the Ledgestone line and works well with wood, warm brick, and cream trim.
Ledgestone is a manufactured stone veneer made from Portland cement, lightweight aggregates, and mineral oxide pigments, cast in molds taken from real stone. The profile is a rough, split-face ledge: long, narrow stones stacked in tight horizontal courses. Pieces vary in height and depth, which gives the wall natural shadow lines. Stones range from about 1" to 6" tall and 6" to 22" long, and are roughly 1"–2" thick. That makes it much lighter than full-bed stone, so it can go over framed walls without footings or ledgers.
Use Gola Corners on interior and exterior walls, fireplace surrounds, backsplashes, and accent walls. They are not for floors, hearth tops that get walked on, or showers. Corners come in cartons priced by the linear foot of corner rise and pair with Ledgestone Gola Flats for a matched install.
| Spec | Detail |
|---|---|
| Brand / Collection | Casa di Sassi / Ledgestone |
| Color | Gola (brown and tan with soft beige) |
| Product Type | Corner (accessory) |
| Material | Manufactured stone (Portland cement, lightweight aggregate, mineral oxides) |
| Texture | Split face |
| Stone Size Range | ~1"–6" H × 6"–22" L (irregular) |
| Thickness | ~1"–2" |
| Coverage | 8 Sq. Ft. |
| Applications | Interior and exterior walls, fireplace surrounds, backsplash, accent walls |
| Not For | Floors, showers, areas exposed to de-icing salts or harsh chemicals |
What surfaces can Gola Corners be installed over?
Framed walls with proper sheathing and lath, plus concrete block and poured concrete. The wall needs to be prepped for adhered veneer per NCMA guidelines.
How do I handle a column with four corners?
Measure the height of each corner and add them together. A 4-ft.-tall column with four corners needs 16 linear ft., which is 2 cartons.
Should I seal Gola?
It isn't required. If you do seal it, use a breathable, water-based masonry sealer and test a small area first, since some sealers darken the color.
How should I clean it?
Use a soft brush with water and mild soap. Skip acid cleaners, pressure washers, and wire brushes.
Is Gola a good fit for a farmhouse or rustic look?
Yes. The warm brown and tan tones and rough split face suit rustic, farmhouse, and lodge-style spaces. It also works as a warm accent in more modern rooms.
Sku: RS-GLC-CDS-8
Related Products
You might also like
Loading recommendations...