Free Shipping On Orders Over $1500. Limited Time Only.

Realstone Systems Casa Di Sassi Ledgestone Matera Corners

Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.

Coverage Calculator

18.0 Sq. Ft. Minimum

 Sq. Ft.

 Carton

$11.39

/Sq. Ft.


$91.12

/Carton

Free Shipping On Orders over $1,500 Over 2,000 Sq. Ft., you may qualify for a volume discount.
Please contact us.

Total Price: 



Casa di Sassi Ledgestone Matera Corners

Matera Corners are the matching corner pieces for Casa di Sassi's Ledgestone Matera stone veneer. Each piece is L-shaped with two finished faces, so outside corners on walls, columns, and fireplace surrounds look like solid stacked stone instead of showing a cut edge. Matera mixes gray, brown, and taupe with earthy undertones. It sits between the warm and cool colors in the line, so it fits most exteriors and interiors.

Ledgestone is a manufactured stone veneer made from Portland cement, lightweight aggregates, and mineral oxide pigments, cast in molds taken from real stone. The pattern is modeled on natural ledgestone found in the Tennessee hills. It's a rough, split-face ledge of long, narrow stones stacked in tight horizontal courses. Stones range from about 1" to 6" tall and 6" to 22" long, and are roughly 1"–2" thick. That makes it much lighter than full-bed stone, so it can go over framed walls without footings or ledgers.

Use Matera Corners on interior and exterior walls, fireplace surrounds, backsplashes, and accent walls. They are not for floors, hearth tops that get walked on, or showers. Corners come in cartons priced by the linear foot of corner rise and pair with Ledgestone Matera Flats for a matched install.


Spec Detail
Brand / Collection Casa di Sassi / Ledgestone
Color Matera (gray, brown, and taupe with earthy undertones)
Product Type Corner (accessory)
Material Manufactured stone (Portland cement, lightweight aggregate, mineral oxides)
Texture Split face
Stone Size Range ~1"–6" H × 6"–22" L (irregular)
Thickness ~1"–2"
Coverage 8 Sq. Ft.
Applications Interior and exterior walls, fireplace surrounds, backsplash, accent walls
Not For Floors, showers, areas exposed to de-icing salts or harsh chemicals

 

What's the difference between corners and flats?
Flats are single-faced stones that cover open wall area. Corners have two finished faces at a right angle, so they wrap outside edges and show stone on both sides.

How much extra should I order?
Plan on about 10% overage for cuts and color blending. Odd-shaped walls with lots of corners may need a little more.

Can I use Matera on a fireplace?
Yes, on the surround and the wall above it. Keep it off hearth surfaces that get walked on, and follow the fireplace maker's clearance rules.

Will Matera look good next to gray siding or brown brick?
Usually yes. Matera has both gray and brown in it, so it bridges cool and warm materials better than a single-tone stone.

Is it okay to install in cold weather?
Mortar shouldn't be applied below about 40°F or onto frozen surfaces. Protect fresh work from freezing until it cures.

 


Sku: RS-MLC-CDS-8