- Home
- Natural Stone & Marble
- Realstone Systems Casa Di Sassi Quartz Ledgestone Ardesia
Realstone Systems Casa Di Sassi Quartz Ledgestone Ardesia
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Casa di Sassi Quartz Ledgestone Ardesia Stone Veneer
Quartz Ledgestone in Ardesia is a manufactured stone veneer with a split-face texture and a layered ledgestone profile. The color is a cool grey with ash and pewter undertones, like weathered slate. It works on a modern build with clean lines and on a traditional one.
Each piece is cast in cement from molds taken from real stone, so it has the edges and surface detail of quarried ledgestone without the weight. It comes as loose stones, 1" to 6" tall and about 18" long. The mix of heights is what gives the wall its layered look. Installers set the stones by hand, so the wall reads as hand-laid stone instead of a repeating panel.
It's rated for interior and exterior walls, fireplaces, chimneys and hardscape, and for freeze-thaw climates. That makes it a good fit for Ohio facades and outdoor kitchens. It isn't for floors, countertops, showers or any surface that gets wet over and over. Keep it away from de-icing salts, and don't pressure wash or sandblast it.
Set it in mortar with a 1/2" joint, following NCMA guidelines and local code. Matching Ardesia corners are sold separately. Order them with the flats for any outside corner, column or window return. Realstone also makes matching accessories for this line, including sills, wall caps, keystones, hearthstones, light blocks, receptacle blocks and hose bib blocks. These are useful when you're cladding a whole exterior wall.
| Specification | Detail |
|---|---|
| Brand | Casa di Sassi |
| Collection | Quartz Ledgestone |
| Color | Ardesia (cool grey, ash and pewter undertones) |
| Product Type | Manufactured stone veneer, flats |
| Format | Loose stone |
| Material | Cast cement |
| Texture | Split-face |
| Piece Size | 1"–6" H × 18" L (approx.) |
| Average Thickness | 2.75" |
| Coverage | 13 Sq. Ft. per carton |
| Grout Joint | 1/2" |
| Freeze-Thaw | Rated |
| Application | Interior and exterior walls, fireplaces, chimneys, hardscape |
| Not For | Floors, countertops, showers |
| Installation | Mortar set |
| Matching Trim | Quartz Ledgestone Ardesia Corners (sold separately) |
| Warranty | 50 years |
Will Ardesia hold up on an exterior wall in Ohio winters?
Yes. Quartz Ledgestone is rated for freeze-thaw use. Install it over a proper drainage plane with flashing, and keep de-icing salts off it.
How much do I need for a 6' × 5' fireplace wall?
That's 30 Sq. Ft., so 3 cartons at 13 Sq. Ft. each. With about 10% added for cuts, 3 cartons is tight. Order a 4th if the wall has outside corners or lots of cuts.
Is this real quartz?
No. "Quartz Ledgestone" is the name of the profile. The stones are cast cement, molded from natural stone. That makes them lighter than real stone and easier to install.
Do I need the corner pieces?
If there's an outside corner, yes. The corners are L-shaped so the stone wraps the edge like a full-depth stone. A cut flat piece leaves an obvious seam.
What grout joint does it use?
A 1/2" mortar joint. You can tighten it up for a more stacked look, but plan on 1/2" when you estimate mortar.
Sku: RS-AQLF-CDS-13
Related Products
You might also like
Loading recommendations...