- Home
- Natural Stone & Marble
- Realstone Systems Casa Di Sassi Quartz Ledgestone Ardesia Corners
Realstone Systems Casa Di Sassi Quartz Ledgestone Ardesia Corners
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Casa di Sassi Quartz Ledgestone Ardesia Corners
Quartz Ledgestone Ardesia Corners are the L-shaped outside-corner pieces for Ardesia flats. They have the same split-face texture and the same cool grey with ash and pewter undertones, so a corner matches the wall on both sides.
Use them anywhere stone wraps an outside edge: building corners, porch and post columns, chimney chases, fireplace returns, and window or door openings. Each corner piece has a long face and a short return, laid in alternating directions as the courses go up. That gives the look of full-depth stone. You could cut and miter flats instead, but the seam shows and the mitered edges chip easily. Corners give a cleaner, stronger edge. You don't need them on inside corners, where flats butt together fine.
Corners must be purchased with Quartz Ledgestone Ardesia flats. They aren't a standalone wall product. Order corners and flats together so the color stays consistent across the job.
Set corners first, before the flats, in mortar with a 1/2" joint, following NCMA guidelines and local code. They're rated for the same uses as the flats: interior and exterior walls, fireplaces, chimneys and backsplashes, in freeze-thaw climates. They aren't for floors, countertops, showers or pools.
| Specification | Detail |
|---|---|
| Brand | Casa di Sassi |
| Collection | Quartz Ledgestone |
| Color | Ardesia (cool grey, ash and pewter undertones) |
| Product Type | Manufactured stone veneer, outside corners |
| Material | Cast cement |
| Texture | Split-face |
| Coverage | 8 Sq. Ft. per carton |
| Grout Joint | 1/2" |
| Freeze-Thaw | Rated |
| Application | Outside corners on interior and exterior walls, columns, chimneys, fireplaces, openings |
| Not For | Floors, countertops, showers, pools, steam rooms |
| Installation | Mortar set; install corners before flats |
| Warranty | 50 years |
Where do I need corner pieces?
Use them on any outside edge where you'd otherwise see the side of a flat: building corners, columns, chimney chases and fireplace returns. Most fireplace and chimney jobs have at least two.
Do I need corners on an inside corner?
No. On inside corners the flats just butt into each other. Corners are only for outside edges.
Can I wrap a window opening with these?
Yes. Use corners down the sides and across the head of the opening so the stone looks full-depth into the return.
Will corners match the flats from a different order?
Cast stone can shift a little from batch to batch. Order corners and flats together, and blend from several cartons while you install.
Sku: RS-AQLC-CDS-8
Related Products
You might also like
Loading recommendations...