- Home
- Natural Stone & Marble
- Realstone Systems Casa Di Sassi Volterra Osso Corners
Realstone Systems Casa Di Sassi Volterra Osso Corners
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Casa di Sassi Volterra Stone Veneer Corners – Osso
These are the matching corner pieces for Casa di Sassi's Volterra stone veneer in Osso. Each one is L-shaped with two finished faces, one long and one short, so it wraps an outside corner and shows real stone texture on both walls. Without corners, outside edges show the cut back and side of a flat, and the wall gives itself away as veneer.
Use corners anywhere the stone turns an outside corner or ends at an open edge. That includes house and garage corners, columns, the outer edges of a fireplace or range hood surround, window and door returns, and wainscots that stop partway along a wall. Inside corners don't need them because the flats butt together there. Alternate the long and short legs from one course to the next so the corner reads as laid stone.
Osso is a warm blend of beige and taupe with soft earthy tones. It's lighter than Genoa and warmer than Niveo. The corners are cast in the same color and texture as the Volterra Osso flats and made in the USA from Portland cement, lightweight aggregates, and mineral oxide pigments.
Buy them with Volterra Osso flats, and order both together so they come from the same production run and match in color.
| Spec | Detail |
|---|---|
| Brand | Casa di Sassi |
| Profile | Volterra |
| Color | Osso (beige, taupe, warm earth tones) |
| Piece Type | Corners |
| Material | Manufactured stone veneer |
| Piece Size | 11" × 4"–17-1/2" (varies) |
| Avg. Thickness | 2.75" |
| Grout Joint | 1/2" |
| Coverage | 8 Sq. Ft. per carton |
| Application | Interior and exterior outside corners and exposed ends |
| Pairs With | Volterra Osso Flats (sold separately) |
| Warranty | 50-year limited |
What does a corner piece look like?
It's a single cast stone bent at 90 degrees. One leg is longer than the other, and both outside faces have the same hand-hewn Volterra texture as the flats.
How many corner cartons does a typical fireplace need?
It depends on the height and how many sides are exposed. A standard surround has two outside edges running floor to mantel. Figure the face area those edges will cover and divide by 8.
Should I install corners or flats first?
Corners first. Set the corners on each course, then fill in the flats between them. That keeps the coursing lined up and puts the cut pieces in the middle of the wall, where they're less noticeable.
Can corners go on a column that's exposed on all four sides?
Yes. Each of the four edges gets corners, with flats filling the faces between them. Narrow columns can be mostly corners, so plan for extra cartons.
Are the corners rated for outdoor use?
Yes. Like the flats, they work on exterior walls. Keep them clear of de-icing salts, and don't pressure wash them.
Sku: RS-OVF-CDS-8
Related Products
You might also like
Loading recommendations...