- Home
- Excluded Accessories
- Tile Collection Amelia 3x12 Bullnose Trim Smoke
Tile Collection Amelia 3x12 Bullnose Trim Smoke
Tile and stone products are fragile, and it is normal to have some broken pieces during transit. You may receive up to 5% broken pieces. Please figure this potential breakage into your waste calculation.
Tile Collection Amelia 3x12 Bullnose Trim – Smoke
Amelia Smoke 3x12 Bullnose is the finished-edge piece for the Amelia Smoke collection. One long edge is rounded and glazed, so it gives a clean, smooth stop where your tile ends. Use it on wainscot tops, backsplash edges, shower niches, window returns, and outside corners. It also works as a simple tile baseboard.
The bullnose is matte porcelain with the same travertine-inspired look and soft gray tone as the Amelia Smoke 12x24 field tile and 2x2 basketweave mosaic, so the edge blends in instead of standing out. It's frost-resistant, Greenguard certified, and made in Turkey.
When to use bullnose instead of other edge trim: Choose bullnose when you want the edge finished in the same tile, with a soft rounded profile and no visible metal. If you'd rather have a crisp, modern line, or need to protect a high-traffic corner, a metal edge profile is the alternative. Bullnose is a wall trim piece. It isn't meant to serve as a floor transition between surfaces, where a reducer or threshold is the right part.
This bullnose is sold as trim only and must be purchased with Amelia field tile or mosaic. Install with the same thin-set and grout as your field tile. Amelia has moderate shade variation (V3), so dry-lay the bullnose next to your field tile before setting it, which helps keep the color consistent along the edge.
| Spec | Detail |
|---|---|
| Collection | Amelia |
| Color | Smoke |
| Look | Travertine |
| Material | Porcelain |
| Piece Type | Bullnose trim |
| Finish | Matte |
| Size | 3" x 12" |
| Thickness | 9.7 mm (approx. 3/8") |
| Shade Variation | V3 (moderate) |
| Frost Resistance | Yes |
| Certifications | Greenguard |
| Country of Origin | Turkey |
| Use | Wall edges, wainscot caps, niches, outside corners, baseboard |
| Pairs With | Amelia Smoke 12x24 field tile, Amelia Smoke 2x2 basketweave mosaic |
What is bullnose tile used for?
Bullnose has one rounded, glazed edge for finishing exposed tile edges. It's used on wainscot tops, backsplash ends, shower niches, and outside corners.
Can I buy the Amelia Smoke bullnose by itself?
No. It's a trim piece and must be purchased with Amelia Smoke field tile or mosaic.
Does the bullnose match the 12x24 tile?
Yes. It's the same Smoke color and matte finish as the Amelia Smoke field tile, so the edge reads as part of the wall.
How many pieces do I need?
Measure the total linear feet of exposed edge. Each piece covers about 1 linear foot, and a box of 20 covers roughly 19.7 linear feet. Add about 10% for cuts.
Can I use bullnose as baseboard?
Yes. A row of 3x12 bullnose makes a clean tile baseboard that matches an Amelia Smoke floor.
Sku: ANAAMSMBN312
Related Products
You might also like
Loading recommendations...